Gallery


Step by Step Install Photos

Finished Concrete Slab Lay the Ground Mat Erect the First Steel Module
Finished Slab Lay the Ground Mat Erect the First Steel Module
     
Position the Frame to Allow for the Cladding Keep adding modules alignment and drill the anchor holes
Position the Frame to Allow for the Cladding Keep Adding Modules Check alignment and drill the anchor holes
     
Install anchor bolts Open the outlets on the liner Hang the liner
Install the anchor bolts Open the outlets on the liner Hang the liner
     
Connect the liners Keep Installing frames Hang and connect all the liners
Connect the liners Keep Installing frames Hang and connect all the liners
     
Erect the building frame timber battens Tek through existing holes
Erect the rest of the building frame Add timber battens into the vertical posts Tek through existing holes
     
Sikaflex on the beams Hole for the Inlet Cladding
Sikaflex on the beams to hold cladding Hole for the Inlet Cladding to the outside face and inlet
     
Cladding to the outside face Roof going on Lining the inside
Cladding to the outside face Roof going on Lining the inside
     
create the flashing Finished Inside Finished outside
Fold-up the ground mat to create the flashing Finished Inside Finished outside 
     


 


Leave a comment

Comments have to be approved before showing up